If the fruit and vegetable washing machine wants to have a long life, pay attention to these points

The frequency of use of the fruit and vegetable washing machine is very high, but the price is relatively not very cheap, so once we buy the product, we must ensure that its service life can be longer, so we should not only pay attention to the correct use when using it. Ways, we should also pay attention to other methods. As for what content should be paid attention to, we have compiled relevant information in this area, and everyone can take a look.

1. Items that must be checked before operation

In order to work safely and smoothly, it is very important to check before each job. You must check the items one by one before you start the job.

(1) Inspection of the switch box: Make sure whether the power cord of the non-fuse switch is loose, and it must be tightened if it is loose.

(2) Confirmation and adjustment of the tension of each part of the chain, mesh conveyor belt, press belt and belt.

(3) Whether the gear oil SAE90# of the continuously variable transmission gearbox is excessive or insufficient. If it is excessive, please discharge the excess oil from the oil drain plug. If it is insufficient, please replenish it from the oil filler port.

2. Adjustment and maintenance of vegetable washing machine:

When adjusting, checking and replacing the following parts, the power switch must be turned off first.

(1) Belt adjustment:

1. Implemented after the motor stops.

2. In the middle of the two pulleys, use the fingers (middle finger and index finger) to compress the belt to 7-12mm as the standard value.

3. When greater than the standard value, adjust the idler to the specified tightness.

(2) Chain adjustment:

1. Implemented after the motor stops.

2. Press the chain with your fingers (middle finger and index finger) in the middle of the two sprockets, and the compression amount is 4-9mm as the standard value.

3. When exceeding the standard value, adjust the idler to the specified tightness.

(3) Checking, refueling and replacement of the oil for the continuously variable gearbox:

1. Stop the motor and prohibit fireworks.

2. Use #90 oil.

3. Remove the oil check plug, the oil has just flowed out to an appropriate amount, and replenish it when it is insufficient.

(4) Long-term placement method:

1. The dirt and other objects attached to each part should be cleaned with water and dried with a cloth.

2. The sundries and vegetable leaves entangled with the rotating parts, belts, chains, etc., should be completely removed.

3. Each rotating part and friction driving part are fully oiled to prevent rust.

4. Each chain is fully oiled to prevent rust.

How to ensure the life of the fruit and vegetable washing machine, we have already told you in detail above, I hope everyone should pay attention to this aspect when using it to avoid any mistakes.